When it comes to wear-resistant floors, everyone should be familiar with it, but basically everyone sees finished wear-resistant floors. In the construction of wear-resistant floors, we often encounter various problems. For example, why is the soft diamond abrasive disc consumed quickly during the construction of the wear-resistant floor? How to save the grinding disc?

Today, I will share with you some of the skills of wear-resistant floor polishing in detail. Before officially explaining and introducing these methods to everyone, we must first popularize some basic knowledge of grinding discs. Divided into hard base, medium base and soft base. Hard base grinding discs are used for the ground with poor density, soft base grinding discs are used for better ground quality, and medium base grinding discs are used for general ground.Diamond abrasive belt, 

In the initial stage of the wear-resistant floor construction, most of the concrete floor quality is not very good, especially the renovation of some old floors. The flatness is not good, the ground is loose, and the hardness is poor. Don't worry. This is the main reason for the rapid consumption of abrasive discs in the process of floor renovation and sanding.

1. For the ground with poor quality, it is recommended to use a medium and large floor grinder. After spraying, dry in the shade and use a dry grinder. First, use 30# hard base metal polishing pad to remove the loose surface layer for leveling treatment.

Then use 100# medium-hard or soft-base metal grinding disc to grind, and the flatness and basic hardness are processed well. The following is much simpler.

2. If the density of the ground foundation is poor, the sand particles will wear with the diamond of the grinding disc, which will accelerate the consumption of the grinding disc. At this time, we can harden it before grinding to increase the density of the ground.

3. For ground leveling and rough grinding, diamond grinding discs or thick concrete grinding discs are recommended. Fine sanding discs can be used for good treatment, no coarse sanding discs are needed.

4. For hard concrete floors, it is recommended to use sharp resin grinding discs, increase the counterweight of the machine, reduce the speed of the mill, and reduce the forward speed. It is recommended to use durable resin grinding discs on soft concrete floors to increase the speed of the mill and speed up the advancement.

5. Don't miss the number when using the grinding disc, otherwise others will laugh at you. According to normal use, dry grinding saves more consumables than water grinding, but water grinding treatment will make the ground smoother and finer.

The correct construction method is an important guarantee for high-quality floors. Choosing a suitable polishing pad according to the actual situation of the ground can not only reduce the consumption of polishing pads for everyone, but also reduce the construction cost., diamond abrasive cloth,

Diamond emery cloth prompts the content source network, if there is any infringement, please contact the administrator to delete it, thank you!