Diamond water abrasive pads are also called diamond soft abrasive pads, which have the characteristics of strong abrasive power, good durability, good softness, good clarity and good gloss. They are ideal stone grinding tools, diamond abrasive cloth, diamond abrasive cloth, 

Maintenance method of diamond grinding disc:

1. If you do not use the diamond abrasive sheet immediately, you should lay it flat or use the inner hole to hang it. Do not stack other objects or footsteps on the flat diamond grinding disc, and pay attention to moisture and rust prevention.

2. When the diamond water-grinding sheet is not sharp and the cutting surface is rough, it must be re-polished in time. Polishing cannot change the original angle and destroy the dynamic balance.

3. The inner diameter correction and positioning hole processing of the diamond water mill must be carried out by the manufacturer. If the processing is poor, it will affect the use of the product and may cause danger. In principle, the reaming should not exceed the original diameter of 20mm, so as not to affect the stress balance.

Requirements for the use of diamond grinding pads:

1. When working, make sure that the workpiece is fixed and the profile is aligned with the direction of the knife to avoid abnormal cutting. Do not apply side pressure or curve cutting. The knife should be stable to avoid hitting the blade and contacting the workpiece, which may cause damage to the grinding plate or fly out of the workpiece. accident.

2. During work, if abnormal sound and vibration, rough cutting surface or peculiar smell are found, the operation must be stopped immediately, and the faults must be checked in time to avoid accidents.

3. When starting and stopping cutting, do not feed the tool too fast to avoid tooth breakage and damage.

4. When cutting aluminum alloy or other metals, cooling lubricants should be used to prevent the grinding plate from overheating and generating toothpaste, which will affect the cutting quality.

5. The equipment chip trough and slag suction device ensure unobstructed, prevent the accumulation of slag, which affects production and safety.

6. When dry cutting, please don't cut continuously for a long time, so as not to affect the service life of water milling and cutting fruit; wet cutting should use water cutting to prevent leakage。Diamond abrasive belt, 

Diamond emery cloth prompts the content source network, if there is any infringement, please contact the administrator to delete it, thank you！