When we polish and refurbish the ground, we need to understand the requirements for operating the machine, as well as the requirements for the use of diamond abrasive discs, so that we can achieve Ango construction. The following diamond belt manufacturers will give you a brief understanding.Diamond abrasive belt,
1. Check the mechanical equipment before work.
2. When working, the workpiece must be fixed, the profile positioning must be consistent with the direction of the knife to avoid abnormal cutting, do not apply side pressure or curved cutting, and the knife must be stable to avoid the impact of the blade contact with the workpiece, which may cause damage to the water mill. Or the workpiece flies out and an accident occurs.
3. During work, if abnormal sounds and vibrations, rough cutting surfaces or peculiar smells are found, the operation must be stopped immediately, and faults must be checked in time to avoid accidents.
4. When dry cutting, please do not cut continuously for a long time, so as not to affect the service life of water milling and cutting fruit; wet cutting, water cutting should be used to prevent leakage.
5. When starting and stopping cutting, do not feed the tool too fast to avoid tooth breakage and damage.
6. When cutting aluminum alloy or other metals, cooling lubricants should be used to prevent the grinding piece from overheating and generating toothpaste and other damage, which affects the cutting quality.
7. The equipment chip trough and slag suction device ensure unobstructed, prevent slag accumulation and agglomeration, affecting production and safety.
The diamond soft grinding disc prompts the content source network, if there is any infringement, please contact the administrator to delete it, thank you!