Only The Correct Selection And Use Of Abrasive Belts Can Correctly Solve Various Problems In The Use Of Abrasive Belts,Diamond Abrasive Cloth,Ensure The Superiority Of Abrasive Belt Grinding And The Grinding Performance Of Abrasive Belts, And Ensure The Quality Of Abrasive Belts. The Processed Workpiece Can Be Guaranteed.Diamond abrasive belt,

1. Principles Of Use

(1) Reasonably Choose The Abrasive Belt Model

The Shape Of The Workpiece Is Different In The Type Of Abrasive Belt Selected For Different Workpiece Materials. The Choice Of The Abrasive Belt Model Is Mainly Based On The Material Of The Substrate, The Material Of The Abrasive, The Type Of Adhesive, And The Bonding Method Of The Abrasive Belt. Choose From Them. This Knowledge Has Been Reported Many Times In The Domestic Literature, So This Article Will Not Introduce It Here.

(2) Choose The Right Particle Size

Only By Choosing The Right Abrasive Belt Granularity Can The Surface Quality Of The Processed Workpiece And The Service Life Of The Abrasive Belt Be Improved. If The Particle Size Of The Selected Abrasive Belt Is Too Small, The Surface Quality Of The Processed Workpiece Cannot Be Guaranteed; If The Particle Size Of The Selected Abrasive Belt Is Too Large, The Abrasive Belt Is Prone To Wrinkles And Breaks During Use, Which Will Reduce The Service Life Of The Abrasive Belt.

(3) Multi-Belt Grinding Process Selection

If A Workpiece Adopts Multiple Belt Grinding Processes, The Grain Size Of The Belt Used In The Subsequent Process Can Only Skip Two Grain Sizes Compared With The Previous Process. Only In This Way Can The Efficiency Of Belt Grinding Be Brought Into Play And The Processing Can Be Guaranteed. The Shape And Size Of The Workpiece And The Surface Quality Of The Processed Workpiece.

(4) Distribution Of Removal During Multi-Pass Belt Grinding

Two Processes: The Distribution Ratio Of Front And Rear Channels Is 85/15;

Three Procedures: The Allocation Ratio Of Front And Rear Lanes Is 65/25/10;

Four Processes: The Allocation Ratio Of Front And Rear Lanes Is 50/30/12/8

(5) Selection Of Running Direction Of Diamond Abrasive Belt

When Using A Waist Belt, Please Make Sure That The Running Direction Of The Belt Is Consistent With The Direction Marked On The Back Of The Belt, Otherwise The Belt Will Break Prematurely During Use, Which Will Affect The Surface Quality Of The Processed Workpiece. When Using A Butt Belt, The Running Direction Of The Belt Can Be Ignored.

2. Problems And Solutions That Are Easy To Occur In Abrasive Belt Grinding

Only When The Abrasive Grains Of The Abrasive Belt Become Blunt And The Abrasive Belt Loses Its Grinding Performance, Is The Normal End Of The Service Life Of The Abrasive Belt. However, In The Actual Abrasive Belt Grinding Process, Due To The Poor Quality Of The Abrasive Belt, Poor Quality Of The Workpiece, Equipment Problems And Improper Operation,Diamond Soft Grinding Disc, The Abrasive Belt Will Be Scrapped If The Abrasive Grains Are Not Blunt, diamond abrasive cloth,

Diamond Emery Cloth Prompts The Content Source Network, If There Is Any Infringement, Please Contact The Administrator To Delete It, Thank You!